Infiniti Q30 Forum banner

1 - 3 of 3 Posts

Registered
Joined
103 Posts
Discussion Starter · #1 ·
I see Tema4x4 do GLA lift kits. Tempted to get the rear 20mm lift as it would purely look better, no other reason. Not keen on the saggy lower at the back look myself.
Anyone else lifted a Q30S / QX30 sport?
 

Registered
Joined
103 Posts
Discussion Starter · #2 ·
Well I have taken the plunge 馃槄. With the wheels off the ground front and back I have 4" of clearance above the tyres to the shock travel limits. With them back on the ground I have 2" front and 1.3/4" rear. So I have ordered the PLUS 20mm (3/4") Tema top mounts for the rear. So should have 2" front and 2.5" rear when installed.

It's a personal thing. I just like the wheel gaps to be the same as the front or slightly greater at the back.

Screenshot_20201216-185048_eBay.jpg
 

Registered
Joined
103 Posts
Discussion Starter · #3 ·
These turned up last week and I fitted them over the weekend. Very easy to install with basic tools, 16 and 18mm sockets, E18 star drive and 16mm spanner. I did some research, set the 10mm nut torque with medium threadlock to 50nm and the 12mm again with threadlock to 88nm. I have gained around 15mm more clearance at the rear as I wished for - so i am very pleased.
1562
1563
 
1 - 3 of 3 Posts
Top