[Ivan]

Aliexpress in Hong Kong

Well, the new ballast is now fitted, and by some stroke of luck, I have a fully operational headlight, with a bright white DRL.
The old ballast had a burn mark, where something had clearly burnt out, but once the light was out, it was literally 5 minutes to unscrew the ballast, unclip the 2 plugs, and refit the new one. Happy days

Hi, can you please explain me how to disassemble the DRL control module?? Thank you!

 

[Kev H]

Hi, can you please explain me how to disassemble the DRL control module?? Thank you!

Once the headlight is out from the car, it is literally held in with 3 screws, and inside, there are 2 little plugs to un- attach. The hard part is getting the headlight out. Good luck 👍

 

[Ivan]

Once the headlight is out from the car, it is literally held in with 3 screws, and inside, there are 2 little plugs to un- attach. The hard part is getting the headlight out. Good luck 👍

Some guide for getting the headlight out? It's difficult??Sorry for so many questions...

 

[Kev H]

Can't deny it's a bit tricky !. The front of the car has to come off, or at least undone. A friend of mine helped me out, but the changing of the part takes about 2 minutes

 

[Ivan]

Can't deny it's a bit tricky !. The front of the car has to come off, or at least undone. A friend of mine helped me out, but the changing of the part takes about 2 minutes

Okay, thank you very much!